Castor Expanders and Buffers

Expanders are used to secure castors to your products, If you have an application which requires castors and has tube or box section legs, Expanders are a great method of attaching castors to the bottom. Insert an Expander  into the leg of the application then simply tighten an Allen head bolt under the castor so the expander then expands and tightens against the outer wall,  holding the castor in place.

Inserts:  Coldene Inserts are a threaded plastic block with a brass or stainless steel nut moulded inside.  You  measure by the internal size of the tube. The Insert will just need hammering into the leg.  Once in place you just bolt the castor or Load Foot into the Insert.  Inserts are more secure than Expanders.

Buffers:   Coldene Castors'  Buffer range is ideally suited if your application requires protection against obstacles (walls) The Buffer will fit over the legs on each corner and will be the first part of the application to make contact with anything else. Buffers are Commonly found on Hospital beds.

Coldene Buffers fit on square box and round tube sections and come in several sizes.

Castor Expanders and Buffers

 
 
Expanders, Inserts & Buffers - Round
Expanders, Inserts & Buffers - Round
From £2.35
 
Expanders, Inserts & Buffers - Square
Expanders, Inserts & Buffers - Square
From £2.53
 
Buffer Wheels
Buffer Wheels
From £6.66
 

Page  · 1 ·        show all